6. Firmware Upgrade Process

ACER X193HQ

 

31

 

 

 

Go to cover page

6.1 Hardware Configuration

Connect VGA cable between monitor and kit

Connect USB and VGA cable between PC and kit

6.2Realtek F/W Configuration:

Step-1 Launch the utility of “DebugTool_V6.2.exe”

If it shows “No USB Device”, there is a problems with communication .you should confirm your USB device whether be detected by your PC device management or reconnect the USB cable again.

Step-3Select ISP icon.

Step-2 Select “USB”

Step-4 Follow up the red square indication

Select “both”,”Checksum”,”Auto”,”Page Erase”,

Select “21” for Extend size.

Page 32
Image 32
Acer RA19WAANU service manual Firmware Upgrade Process