12
English
The Post-setup Wizard
The Post-setup Wizard will open on the first boot after you finish
installing the operating system. Since there are some drivers that
cannot be installed during the standard installation process, you may
need to install them after the operating system has been installed.
The Post-setup Wizard will inform you which drivers need installing;
click the links to install the necessary drivers. Only drivers that have not
yet been installed will be shown in this window. The Post-setup Wizard
will run on each start up until all the required drivers are installed.
Once all drivers are installed you may disable running on start up.
If you want to launch this program at any time, click Start > All
Programs > Aspire RevoBuild Post-setup Wizard. This will allow you to
access install additional drivers and/or software.