7.Unscrew 4 screws holding the right and the left LCD brackets, 2 on each side.
8.Remove the right and the left LCD brackets as shown.
9.Tear off electric conductive tape that secures the LCD wire, and disconnect the LCD wire.
Disassembling External Modules
Disassembling the ODD Module
1.Remove 6 screws that secure the ODD module as shown.
2.Slide the optical disk drive out off the ODD bracket.
3.Remove the ODD board from the ODD bracket.
4.Use a pin to press the emergency eject slot to open the ODD as shown.
5.Unscrew the 1 screw holding the ODD door.
6.Remove the ODD door.
60 | Chapter 3 |
