Setup menu
System Setup
Note: Pressing the RETURN Button will exit to the next highest menu level.
1)Press the Direction Buttons [◄/►} to select the “Setup Menu”.
2)Press the ENTER Button to confirm it.
General
1)Press the Direction Buttons [▲/▼] to select “General”.
2)Press the ENTER Button or Direction Button [►} to confirm it.
Screen Saver
1)Press the Direction Buttons [▲/▼] to select “Screen Saver”.
2)Press the ENTER Button or Direction Button [►} to select the
3)Press the Direction Buttons [▲/▼] to select “On” or “Off”.
4)Press the ENTER Button to confirm it.
Note: The Screen Saver starts after 3 Minutes of inactivity, and the unit will go into Standby Mode after 25 Minutes (Just like pressing power with the remote).
Use Default Settings
1)Press the Direction Buttons [▲/▼] to select “Use Default Settings”.
2)Press the ENTER Button or Direction Button [►} to select the
3)Press the Direction Buttons [▲/▼] to select “Yes” or “No”.
4)Press the ENTER Button to confirm it.
Note: This will restore all settings to their original factory defaults.
BD Info Storage
1)Press the Direction Buttons [▲/▼] to select “BD Info Storage”.
2)Press the ENTER Button or Direction Button [►} to select the
BD Info Storage
1)Press the Direction Buttons [▲/▼] to select “BD Info Storage”.
2)Press the ENTER Button or Direction Button [►} to select the
3)Press the Direction Buttons [▲/▼] to select the device type.
Note: This menu will change according to the currently installed media (example: a USB drive).
4)Press the ENTER Button to confirm it.
Nand
1)Press the Direction Buttons [▲/▼] to select “Nand”.
2)Press the ENTER Button or Direction Button [►} to select the
3)Press the Direction Buttons [▲/▼] to select the device type.
4)Press the ENTER Button to confirm it.
Format
Note: Use with extreme caution! This procedure will completely erase ALL previously stored information on the device.
1)Press the Direction Buttons [▲/▼] to select “Format”.
2)Press the ENTER Button or Direction Button [►} to select the
3)Press the Direction Buttons [◄/►} to select “Yes”, or “No” on the confirmation Screen.
4)Press the ENTER Button to confirm it. Note: This screen will revert to the previous menu unless “Yes” is selected within 30 seconds to prevent accidental erasure.
Free Space
Displays the total amount of memory available for storage in the currently selected device.
Total Space
Displays the total memory size of the currently selected device.
Version
1)Press the Direction Buttons [▲/▼] to select “Version”
2)Press the ENTER Button or Direction Button [►} to select the
9
