Lexmark 696, 496, 896 manual Setup 1 Printer is connected directly to a cable modem, Faxing 136

Faxing 136

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

1Connect one end of the telephone cable that came with your printer to the port of the printer.

2Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port.

3Connect your analog telephone phone to the port of the printer.

Notes:

•To make sure that the telephone port on the cable modem is active, plug an analog telephone into the telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.