Lexmark 496, 696, 896 manual Network Card menu, TCP/IP menu, Understanding the printer menus 177

Understanding the printer menus 177

Reports menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > Reports

•Network/Ports > Network [x] > Network [x] Setup > Reports

UseTo

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > Network Card

•Network/Ports > Network [x] > Network [x] Setup > Network Card

Use	To
View Card Status	View the connection status of the wireless network adapter.
Connected
Disconnected
View Card Speed	View the speed of an active wireless network adapter.
Network Address	View the network addresses.
UAA
LAA
Job Timeout	Set the amount of time it takes for a network print job to be canceled.
0, 10–225 seconds	Notes:
	• “90 seconds” is the factory default setting.
	• A setting value of 0 disables the timeout.
	• If a value between 1 and 9 is selected, then Invalid appears on the
	display, and the value is not saved.
Banner Page	Allow the printer to print a banner page.
Off	Note: Off is the factory default setting.
On

TCP/IP menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > TCP/IP

•Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers attached to print servers.

Use	To
Set Hostname	Set the current TCP/IP host name.
	Note: This can be changed only from the Embedded Web Server.