Lexmark 496, 696, 896 manual Reattach bins x y, Reinstall missing or unresponsive cartridge 31.xy

Troubleshooting 312

Reattach bins [x] – [y]

Try one or more of the following:

•Turn off the printer, and then turn it back on.

•Reattach the indicated bins:

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the indicated bins.

4Reattach the bins.

5Connect the power cord to a properly grounded electrical outlet.

6Turn the printer back on.

•Remove the indicated bins:

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the indicated bins.

4Contact customer support at http://support.lexmark.com or your service representative.

From the printer control panel, touch Continue to clear the message and print without using the indicated bins.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

•Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide.

•If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner cartridge.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

•Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide.

•If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the imaging unit.

Remove defective disk [61]

Remove and replace the defective printer hard disk.