Lexmark 696, 496, 896 manual Understanding the printer menus 226

Understanding the printer menus		226
Offset Stacker	Offset pages at certain instances.
None	Notes:
Between Copies
	• None is the factory default setting.
Between Pages
	• This menu item appears only when an offset stacker or a staple finisher is installed.
Hole Punch	Specify whether prints have punched holes.
Off	Notes:
On

•Off is the factory default setting.

•This menu item appears only when a supported staple, hole punch finisher is installed.

Hole Punch Mode	Specify the number of holes to be made on the prints.
2 holes	Notes:
3 holes
	• “3 holes” is the U.S. factory default setting. “4 holes” is the international factory default
4 holes
	setting.
	• This menu item appears only when a supported staple, hole punch finisher is installed.
Duplex Binding	Define binding for duplexed pages in relation to the page orientation of the printed document.
Long Edge	Notes:
Short Edge
	• Long Edge assumes binding along the long edge of the page (left edge for portrait and top
	edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for portrait and
	left edge for landscape).
Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
Off	Notes:
2‑Up
	• Off is the factory default setting.
3‑Up
	• The number selected is the number of page images that will print per side.
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Ordering	Specify the positioning of multiple‑page images.
Horizontal	Notes:
Reverse Horizontal
	• Horizontal is the factory default setting.
Reverse Vertical
	• Positioning depends on the number of page images and whether they are in portrait or
Vertical
	landscape orientation.
Paper Saver Orientation Specify the orientation of a multiple‑page document.
Auto	Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Landscape
Portrait
Paper Saver Border	Print a border on each page image.
None	Note: None is the factory default setting.
Solid