Lexmark 496, 696, 896 manual Load staples, Memory full, cannot print faxes

Troubleshooting 309

•From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.

•Cancel the print job.

Load staples

Try one or more of the following:

•Replace or insert the staple cartridge in the finisher.

For instructions on inserting or replacing a staple cartridge in the finisher, touch More information on the printer control panel.

•From the printer control panel, touch Continue to clear the message and continue printing.

•From the printer control panel, touch Cancel job to cancel the print job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Maintenance kit nearly low [80.xy]

For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

•From the printer control panel, touch Cancel job to clear the message.

•Install additional printer memory.

Memory full, cannot print faxes

From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt to print after the printer is restarted.