Lexmark 896, 496, 696 manual Understanding the printer menus 203

Understanding the printer menus		203
	Use	To
	Content Source	Specify how the original document was produced.
	Black/White Laser	Note: Black/White Laser is the factory default setting.
	Color Laser
	Inkjet
	Photo/Film
	Magazine
	Newspaper
	Press
	Other
	Sides (Duplex)	Specify whether an original document is two‑sided (duplex) or one‑sided, and then to
	1 sided to 1 sided	specify whether the copy should be two‑sided or one‑sided.
	1 sided to 2 sided	Notes:
	2 sided to 1 sided	• 1 sided to 1 sided—The original document has print on one side and the copy
	2 sided to 2 sided
		will also have print on one side.
		• 1 sided to 2 sided—The original document has print on one side, while the
		copy will have print on both sides.
		• 2 sided to 1 sided—The original document has print on both sides, while the
		copy will have print on just one side.
		• 2 sided to 2 sided—The original document has print on both sides, and the
		copy will also have print on both sides.
	Paper Saver	Copy two or four sheets of a document on one page.
	Off	Note: Off is the factory default setting.
	2‑up Portrait
	4‑up Portrait
	2‑up Landscape
	4‑up Landscape
	Print Page Borders	Specify whether or not a border is printed.
	On	Note: Off is the factory default setting.
	Off
	Collate	Keep the pages of a print job stacked in sequence when printing multiple copies.
	1,1,1 ‑ 2,2,2	Note: “1,2,3 ‑ 1,2,3” is the factory default setting.
	1,2,3 ‑ 1,2,3
	Punch	Specify the type of hole punch finishing to be used in a print or copy job.
	Off	Note: Off is the factory default setting.
	2 holes
	3 holes
	4 holes
	Staple	Enable or disable the staple finisher.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu item appears only when a staple finisher is installed.