Lexmark 496, 696, 896 manual Understanding the printer menus 207

Understanding the printer menus		207
	Use	To
	Enable Manual Fax	Set the printer to fax manually, which requires a line splitter and a telephone handset.
	On	Notes:
	Off
		• Use a regular telephone to answer an incoming fax job and to dial a fax
		number.
		• Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
		• Off is the factory default setting.
	Memory Use	Define the allocation of non-volatile memory between sending and receiving fax jobs.
	All receive	Notes:
	Mostly receive
		• “Equal” is the factory default setting. Equal splits the memory for sending and
	Equal
		receiving fax jobs into equal amounts.
	Mostly send
		• “Mostly send” specifies that most of the memory is set to send fax jobs.
	All send
		• “All send” specifies that all the memory is set to send fax jobs.
		• “All receive” specifies that all the memory is set to receive fax jobs.
		• “Mostly receive” specifies that most of the memory is set to receive fax jobs.
	Cancel Faxes	Specify whether or not the printer cancels fax jobs.
	Allow	Note: Allow is the factory default setting.
	Don't Allow
	Caller ID	Specify the type of caller ID being used.
	Off
	Primary
	Alternate
	Fax number masking	Specify the direction from where digits are masked in an outgoing fax number.
	Off	Notes:
	From left
		• The number of characters masked is determined by the “Digits to mask”
	From right
		setting.
		• Off is the factory default setting.
	Digits to Mask	Specify the number of digits to mask in an outgoing fax number.
	0–58	Note: 0 is the factory default setting.