Lexmark 496, 696, 896 manual Accessing the controller board

Models: 696 496 896

1 396
Download 396 pages 41.36 Kb
Page 30
Image 30

Additional printer setup

30

Accessing the controller board

Note: This task requires a flathead screwdriver.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1Open the controller board access cover.

2Using a screwdriver, loosen the screws on the controller board shield.

Page 30
Image 30
Lexmark 496, 696, 896 manual Accessing the controller board