Acoustic Research AWD205 owner manual To connect to your computer’s USB port, Getting Started

GETTING STARTED

To connect to your computer’s USB port:

3

1 2

Transmitter (back panel)

1.Connect a USB cable (not included) to an available USB port on your computer.

2.Connect the other end of the USB cable to the transmitter’s USB Power In jack.

3.Set the ANALOG/USB switch on the transmitter’s back panel to USB.

IMPORTANT: If you’re using this USB connection to your computer, do not connect the built-in 3.5mm audio cable to your computer. This USB connection to your computer sends power and audio to the transmitter, so you don’t need to make any other transmitter connections.

6