Acoustic Research AWD205 owner manual Using The Wireless Headphones, Turning the Headphones On

GETTING STARTED

USING THE WIRELESS HEADPHONES

Turning the Headphones On

On/Off switch (right

headphone,

bottom)

Indicator (right headphone, side)

1.Make sure the transmitter is plugged in and connected to an audio source.

2.Put the On/Off switch on the right headphone in the On position. The indicator on the right headphone lights up green and blinks slowly to show that the headphones are on.

3.Switch on the audio source (TV, DVD, CD player, etc.) the transmitter is connected to. If your audio source is a DVD or CD player, start a disc. The On indicator on the transmitter’s front panel turns green and blinks rapidly, indicating that the transmitter is trying to link with the headphones.

The headphones and transmitter should link automatically in a matter of seconds—the transmitter’s On light and the headphone’s indicator both turn solid green when linked.

If the transmitter and headphones do NOT link automatically: Press and hold the Link button on the back of the transmitter for five seconds. Then press and hold the Link button on the right headphone for 5 seconds. The headphones and transmitter lock onto each other for wireless transmission. The LED on the headphones flashes while the devices are tuning; it stays on once the devices are tuned.

Link buttons

4.If you’re using a variable-level audio output (something you can set the volume on), adjust the volume on your audio source. Then adjust the volume using the Volume wheel on the right earphone.

7