Acoustic Research AWD205 Setting Up The Transmitter, Using the built-inaudio cable, 1 4

GETTING STARTED

SETTING UP THE TRANSMITTER

The 2.4GHz wireless transmitter works with a wide variety of audio sources, from portable MP3 players to A/V receivers to DVD players or gaming systems. It can even connect to your computer’s USB port to deliver 100% digital audio. The way you set it up depends on the kind of output you want to use on your audio source.

Using the built-in audio cable:

1

4

2

3

Transmitter (back panel)

If your audio source has stereo RCA outputs: Connect the red and white plugs of a stereo Y adapter cable (not included) to the audio source’s line out jacks. Connect the other end of the stereo Y adapter cable to the transmitter’s built-in audio cable.

1.Plug the transmitter’s built-in audio cable into the headphone jack on your audio source.

2.Set the ANALOG/ USB switch on the transmitter’s back panel to ANALOG.

3.Connect the end of the AC power adapter with the USB connector to the USB Power In jack on the transmitter’s back panel.

4.Plug the adapter into an electrical outlet.

Important: This power unit is intended to be correctly oriented in a vertical or floor mount position.

Note: High-output sources, such as DVD players or audio receivers/ amplifiers, may cause distortion if used at full volume with the transmitter. Try setting them at 1/2 or 2/3 volume.

5