Acoustic Research AWD205 owner manual Supplied Accessories, Installing The Headphone Batteries

GETTING STARTED

SUPPLIED ACCESSORIES

This headphone system includes accessories that enable you to use your wireless headphone set in a number of ways.

AC power adapter

Wireless headphones

2.4GHz wireless transmitter

Headphone

charging cable 2 AAA rechargeable batteries

INSTALLING THE HEADPHONE BATTERIES

1.Twist the left headphone’s earpad cover counter-clockwise to expose the battery compartment.

2.Insert the two (2) rechargeable AAA batteries (included) in the left headphone, following the polarity (+ and –) diagram inside the compartment.

3.Place the earpad back on the left headphone and twist it clockwise

to lock it back into place.

Important: DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Important: If you are using rechargeable batteries NiMH or NiCd (such as the batteries provided), the batteries will charge when the headphones are connected to the transmitter using the charging cable. DO NOT connect the headphones to the transmitter with the charging cable if you installed alkaline or other non-rechargeable batteries – this could cause the batteries to leak, which would damage the headphones.

4