40
Actiontec 54 Mbps Wireless Cable Router User Manual
41
Chapter 4 Using Advanced Setup

WAN IP Address

Selecting WAN IP Address in the “Configuring the Advanced Settings screen gen-
erates the WAN IP Address screen. WAN IP Address allows manual set up of the
IP address of the Router. There are three ways to do this: Obtain an IP Address
through PPPoE, Obtain an IP Address through DHCP, or Specify a Static
IP Address.
Note: Some DSL providers use PPPoE to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either DHCP or
Static IP address. If unsure about which connection is present,
check with the ISP before continuing.
After selecting a connection type, click Next to continue configuring the connection.
Obtain an IP Address through PPPoE
Select this option to allow the Router to use the Point-to-Point over Ethernet
(PPPoE) protocol.