Actiontec MegaPlug Ethernet Adapter User Manual
Local Device(s) on Your Computer
The list displays all MegaPlug Adapters connected to the computer.
☞Note: If no Adapter appears in the Device List, make sure the Adapter is connected properly (with the appropriate Ethernet cable) to the computer. Then, unplug the Adapter, and plug it back in again. If, after performing these actions, no Adapter appears in the Device List, the Adapter may be defective. Contact technical support.
MegaPlug Encryption Key
Enter an encryption key in this text box to provide security for your MegaPlug network. A key is similar to a password, and can be made up of any combination of letters or numbers, from 4 to 24 characters long. Once activated, this key must be entered into a device’s network configuration to join the MegaPlug network.
PImportant: All Adapters on the same network must have the same encryption key. If not, they will not be able to connect.
Set Local Device Only
Click this button to encrypt the device selected in the “Local Device(s) on your computer” list box.
Advanced
Selecting Advanced from the row of tabs near the top of the Utility’s window gen- erates the “Advanced” tab.
10
