Weather Select
Weather Select displays data including wind chill, dew point, heat index, as well as 24 hour change, and high/low records for outdoor/indoor temperatures, humidity and wind speed. To change the “Weather Select” category shown, press the “SELECT” button on the front of the display. When outdoor/indoor temperature or humidity is chosen, the display cycles through the category’s records in this order:
24 Hour Change (amount the data has changed since 24 hours ago)
Today’s HIGH
Today’s LOW
Month’s HIGH
Month’s LOW
All Time HIGH
All Time LOW
When Wind Speed is chosen, the display cycles through the following records:
Today’s HIGH
Month’s HIGH
All Time HIGH
To clear a record, view one of the values listed above and press the “CLEAR RECORD/RESET” button, located on the back of the unit in the battery compartment. Dashes display to confirm the record has been cleared.
REPLAY Historical Data
This weather station stores historical data that can be viewed in Replay Mode. Data is recorded for the past 48 hours in 30 minute intervals (on the hour and half hour). Historical data is shown with a time and date stamp.
Press the “REPLAY” button to enter Replay Mode. The REPLAY icon and options will be shown on the display below the time.
REPLAY MODE OPTIONS:
•Press the “SET” (
) button to view
•Press the 
) button to view historical data in 30 minute intervals previous to the current “LIVE” data.
•While viewing historical data, press the “+” (
) button to advance the data shown by a 30 minute interval.
You will automatically exit Replay Mode if no buttons are pressed for 10 seconds. To manually exit Replay Mode at any time, press the “REPLAY” button. The display may show or flash the “LIVE” icon to confirm you are exiting Replay Mode and returning to the current (“LIVE”) data view.
12
