OPERATING YOUR ERGO BASIX
I. Attaching Your Heart Rate Monitor
1.) Attach the transmitter belt to your chest
Step 1: Moisten each of the two conductive fabrics of the Chest Belt.
Step 2: Insert the two Pins at the back of the transmitter into the two mounting holes on the Conductive Fabric Chest Belt. Push the transmitter downwards and lock the transmitter in place.
Press Press
Step 3: Adjust the tension of the Elastic Strap and check that theconductive fabrics are firmly against your skin.
2.) Attach your wrist monitor. The watch does not have to be attached to your wrist to register your heart rate, but it should be within 3 feet of your chest.
3.) Press MODE/SET button to start your heart rate reading.
5
