Chapter 10: Protecting Your Data
●
97
Creating a Snapshot with Backup
To create a snapshot with backup:
1
In the Logical Devices View, right-click the logical drive you want to
copy.
2
Select
Create snapshot
, click
with backup to
, then click the name of
the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
Creating a Snapshot Without Backup
To create a snapshot without backup:
1
In the Logical Devices View, right-click the logical drive you want to
copy.
2
Select
Create snapshot
, click
without backup to
, then click the name
of the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
3
Use an operating system-level or third-party data backup tool to
move the snapshot onto a tape drive or other server.
Deleting a Snapshot
When a snapshot is no longer needed, you can delete it from Adaptec
Storage Manager.
To delete a snapshot:
1
In the Logical Devices View, right-click the snapshot you want to
delete.
2
Click
Remove snapshot
.
The snapshot is deleted.