Chapter 9: Managing Logical Drives and Hot Spares

●

88

4

Select a new RAID level, then click 

Next

. Only valid options are 

offered. 

In the example shown in this section, a RAID 1 logical device is 

being changed to a RAID 5 logical device.

5

In the Logical Devices panel, select the disk drives you want to use in 

the modified logical drive. 

Adaptec Storage Manager prompts you to select the correct number 

of disk drives, as shown below.

If you want to remove a specific disk drive and replace it with 

another one (for instance, replace a smaller disk drive with a larger 

one), click on the disk drive you want to remove. An X indicates that 

the selected disk drive will be removed from the logical drive.

6

Modify the Advanced Settings, if required. (See 

Fine-tuning Logical 

Drives on page 78

.)

Number of disk drives required

Page 89
Image 89
Open full-size image