Chapter 9: Managing Logical Drives and Hot Spares

●

78

Fine-tuning Logical Drives

You can fine-tune a new or existing logical drive to meet your needs by 

adjusting the Advanced settings described in this section. (Not all 

options are available for all controllers or all RAID levels.)

Note: 

The default settings in Adaptec Storage Manager are optimal for 

most users and storage spaces. Only advanced users should change the 

settings described in this section.

To fine-tune a logical drive:

1

Open the list of Advanced settings.

If you are creating a new logical drive, follow the instructions in 

Step 6 on page 53

. 

If you are modifying an existing logical drive:

a

In the Enterprise View, click the controller associated with the 

logical drive.

b

In the Logical Devices View, click the logical drive.

c

In the menu bar, select 

Actions

, then click 

Expand or change 

logical device

.

d

Click 

Next

, then click 

Advanced settings

.

Modify the available settings as required for your logical drive (not 

all options are available for all controllers or all RAID levels):

●

Logical drive size (see 

page 75

)

●

Write cache (see 

page 79

)

●

Stripe size (see 

page 79

)

●

Read cache (see 

page 80

)

●

Initialize method (see 

page 80

)

●

Initialize priority (see 

page 81

)

2

Click 

Next

.

3

To apply the changes immediately, click 

Apply

.

To schedule the changes for later, click 

Schedule

, then set the date 

and time. (For more information, see 

page 124

.)

Page 79
Image 79
Open full-size image