Chapter 9: Managing Logical Drives and Hot Spares ●86
An X indicates that the selected disk drive will be removed from the
logical drive, and you are prompted to select another disk drive (of
greater or equal size) to replace it.
6Modify the Advanced Settings, if required. (See Fine-tuning Logical
Drives on page 78.)
7Click Next.
8Review the new logical drive settings. To make changes, click Back.
Note: Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
9To update y our logical drive immediat ely, click Apply, then c lick Yes.
Flashing arrow prompts you to replace the deselected disk drive