Step 5: Customizing Adaptec Storage Manager

●

67

Customizing the Adaptec Storage Manager 

Agent

The Adaptec Storage Manager agent’s default settings are suitable for 

most storage spaces. (See 

page 17

 for more information about the 

agent.) However, you can customize the agent on any system by:

●

Setting the agent to broadcast events on that system to all logged-in 

users. See below.

●

Changing the frequency and duration of the alarm, or choose to 

disable the alarm for that system. See 

page 67

.

●

Changing the operating system event log setting for that system. See 

page 69

.

●

Changing to agent base port number on that system. See 

page 69

.

Any changes you make to the agent settings affect the selected system 

only and are not applied to all systems in your storage space. 

Broadcasting Event Alerts from a System

You can set the Adaptec Storage Manager agent to send event alerts 

about a specific system to all users who are logged into your storage 

space network. You might want to do this if your storage space isn’t 

managed by a dedicated person, or if that particular system is off-site or 

isn’t connected to a monitor. 

Event alerts signal to everyone working on the storage space that 

technical assistance is required for that system.

For more information, see 

Broadcasting Event Alerts to Users on page 

120

.

Changing a System’s Audible Alarm Settings

Warning- and Error-level events on a system (see 

page 101

) trigger an 

audible alarm, a series of beeps which sound every five minutes until 

the event is resolved.

You can change the frequency and duration of the alarm, or choose to 

disable the alarm on any system. For information about using the 

audible alarm, see 

page 121

.

Page 68
Image 68
Open full-size image