Chapter 10: Protecting Your Data

●

98

Enabling Copyback

Note: 

Copyback is an upgrade feature; if the Copyback feature is 

locked, see 

Adding Enhanced Features on page 21

 for information on 

purchasing a feature key.

When a logical drive is rebuilt using a hot spare (see 

page 148

), data 

from the failed drive is transferred to the hot spare. When copyback is 

enabled, data is moved back to its original location once the controller 

detects that the failed drive has been replaced. Once the data is copied 

back, the hot spare becomes available again.

Copyback is disabled by default. 

To enable copyback, right-click the controller, then click 

Enable or 

Disable copy back mode

. (The copyback setting is a toggle switch.) 

Page 99
Image 99
Open full-size image