Appendix A: Configuring SNMP Support

●

155

Configuring SNMP Support on Linux

For the Linux operating system, the Adaptec Storage Manager SNMP 

agent is a sub-agent that interfaces with the UCD-SNMP agentx 

architecture. UCD-SNMP is a third-party package for Linux; for 

information, documentation, and downloads, see 

www.net-snmp.org

.

To configure SNMP support:

1

Install Adaptec Storage Manager (see 

page 28

).

2

Configure the UCD-SNMP master agent to be used with agentx.

3

Start the Adaptec Storage Manager SNMP sub-agent:

From the Adaptec Storage Manager installation directory, run the 

aus-snmpd

 executable.

Refer to your Linux documentation for information on configuring 

UCD-SNMP, agentx, and setting up traps.

Configuring SNMP Support on NetWare

To install Adaptec Storage Manager SNMP support, at the command 

prompt type this command, then press 

Enter

:

load AUS-SNMP.NLM

Refer to your NetWare documentation for information on configuring 

traps.

Page 156
Image 156
Open full-size image