Chapter 11: Monitoring Your Storage Space

●

121

Silencing and Testing the Audible Alarm

By default, when a Warning- or Error-level event (see 

page 101

) occurs 

on any system in the Enterprise View, an audible alarm is triggered on 

the local system. The alarm is a series of beeps, which sound every five 

minutes until the event is resolved. 

You can change the frequency and duration of the alarm, or choose to 

disable the alarm on any system. See 

Changing a System’s Audible Alarm 

Settings on page 67

 for more information.

This section describes how to:

●

Ensure the alarm is working on your local system (see below). 

●

Silence a sounding alarm (see 

page 122

).

●

Disable the alarm for a selected controller (see 

page 122

).

Testing the Alarm

To test the audible alarm to ensure that it’s working on your local 

system:

1

Ensure that the speakers on your local system aren’t muted.

2

In the Enterprise View, click on any controller.

3

In the menu bar, click 

Actions

, select 

Alarm Actions

, then click 

Test 

alarm

.

The alarm sounds. 

4

To stop the test, click 

OK

.

Page 122
Image 122
Open full-size image