Step 4: Building Your Storage Space

●

50

To specify a size for the logical drives, or to make other changes to 

the configuration, click 

Modify logical devices

. See 

Step 6 on page 

53

 for more information.

Note: 

Some operating systems have size limitations for logical 

drives. Before you save the configuration, verify that the size of the 

logical drive is appropriate for your operating system.

5

Click 

Apply

, then click 

Yes

.

Adaptec Storage Manager builds the logical drive(s). The 

configuration is saved on the Adaptec controller and on the physical 

drives.

6

Repeat Steps 

1

 to 

5

 for each controller on your system.

7

Continue with 

Partitioning and Formatting Your Logical Drives

 

below.

Partitioning and Formatting Your Logical Drives

The logical drives you create appear as physical disk drives on your 

operating system. You must partition and format these logical drives 

before you can use them to store data. 

Note: 

Logical drives that have not been partitioned and formatted 

cannot be used to store data.

Refer to your operating system documentation for more information.

Page 51
Image 51
Open full-size image