Chapter 9: Managing Logical Drives and Hot Spares

●

84

While the verification is in progress, the logical device is 

shown as an animated icon (as shown at right) to indicate that 

the task is in progress.

When the verification is complete, an event notice is generated in the 

local system’s event log (and broadcast to other systems, if you have 

event notification set up—see 

page 103

). 

You can now continue working on the controller.

Enabling/Disabling Background Consistency Check

If your controller supports background consistency check, Adaptec 

Storage Manager continually and automatically checks your logical 

drives once they’re in use. (To see if your controller supports 

background consistency check, right-click the controller in the 

Enterprise View and click 

Properties

.)

To enable or disable background consistency check:

1

In the Enterprise View, click the controller.

2

In the menu bar, select 

Actions

, then click 

Enable (Disable) 

background consistency check

.

The controller is updated with the new setting.

Increasing the Capacity of a Logical Drive

You can add more disk drive space to a logical drive to increase its 

capacity (or expand it).

Note: 

The maximum size of a logical drive varies by controller. Refer to 

your controller’s documentation for more information.

The expanded logical drive must have a capacity that’s greater than or 

equal to the original logical drive.

To increase the capacity of a logical drive:

1

In the Enterprise View, click the controller associated with the 

logical drive.

2

In the Logical Devices View, click the logical drive.

Page 85
Image 85
Open full-size image