ADC 19717-A Figure 2. Host Unit User Interface

ADCP-75-169 • Issue 1 • June 2004

FRONT VIEW
		(REFERENCE	(9) SERVICE	(10) NET IN	(11) NET OUT
(1) DC POWER
ON/OFF SWITCH		ITEMS 2 - 8)	INTERFACE	CONNECTOR	CONNECTOR
	LED INDICATORS		CONNECTOR

(12) REVERSE 1		(13) REVERSE 2	(14) FORWARD			(15) DC POWER	(16) COVER PLATE
	RF OUT	RF OUT		RF IN	TERMINAL STRIP

REAR VIEW 19722-A

			(17) ALARM	(18)		(19)	(20)	(21) GROUNDING
		OUTPUT CONNECTOR		PORT 1		PORT 2	PORT 3	STUD
			Figure 2. Host Unit User Interface
			Table 1. Host Unit User Interface
REF	USER INTERFACE		DEVICE				FUNCTIONAL
NO	DESIGNATION						DESCRIPTION
1	I/0		On/Off rocker		Provides DC power on/off control.
			switch
2	POWER		Multi-colored LED		Indicates if the HU is powered (green) or unpow-
			(green/yellow)		ered (off). See Note.
3	STANDBY		Multi-colored LED		Indicates if the system is in the Normal (off),
			(green/yellow/red)		Standby (blinking green), Test (blinking red), or
					Program Load (blinking yellow) state. See Note.
4	HOST UNIT		Multi-colored LED		Indicates if the HU is normal (green), overheated
			(green/yellow/red)		(yellow), or faulty (red). See Note.
5	REMOTE UNIT		Multi-colored LED		Indicates if no alarms (green), a minor alarm
			(green/yellow/red)		(yellow), or a major alarm (red) is reported by the
					RU. See Note.
6	DRIVE		Multi-colored LED		Indicates if the level of the RF input signal to the
			(green/yellow/red)		HU is normal (green), low (yellow), or high
					(red). See Note.

Page 3

© 2004, ADC Telecommunications, Inc.