ADCP-75-169 • Issue 1 • June 2004

FOR INSTALLATION IN 23-INCH

RACKS, REMOVE AND REINSTALL

MOUNTING BRACKETS AS SHOWN

17864-A

Figure 9. Installing the Mounting Brackets for 23-Inch Rack Installations

4.Position the HU in the designated mounting space in the rack (per system design plan) and then secure (but do not tighten) the HU to the rack using the four machine screws provided (use #12-24 or M6 x 10 screws, whichever is appropriate) as shown in Figure 10.

Note: Provide a minimum of 3 inches (76 mm) of clearance space on both the left and right sides of the HU for air intake and exhaust.

17865-A

Figure 10. HU Rack Mount Installation

Page 11

© 2004, ADC Telecommunications, Inc.