ADCP-80-570 • Issue 2 • March 2006
Page 3
© 2006, ADC Telecommunications, Inc.
1.3 Packaged Hardware
The shipped product includes hardware components that are packaged separately and shipped in
the carton with the basic panel. Figure 2 shows the shipped items:
• 5/16-inch long, Phillips drive, 8-32 flat-head screws (8)—Used to secure the mounting
brackets to the panel.
• 3/8-inch long, combination drive, 12-24 pan-head screws (4) and #12 flat washers (4)—
Used to secure the panel mounting brackets to the equipment rack.
• #10 ring terminals (2) for #12–#10 AWG wire—Can be used to connect the grounding
cables to the grounding studs.
• 2-Hole Lugs for #6 AWG wire (4)—Used to connect input power cable to input power
terminal blocks.
Figure 2. Packaged Hardware
ORIENTATION FOR
19-INCH RACK INSTALLATION
ORIENTATION FOR
23-INCH RACK INSTALLATION
3/8-INCH (9.525 MM) 12-24
SCREWS AND #12 WASHERS
5/16-INCH (7.936 MM) 8-32
FLAT-HEAD SCREWS
20633-A
UNIVERSAL MOUNTING BRACKETS
AND SCREWS
DESIGNATION CARD
AND CARD HOLDER
2-HOLE LUGS FOR
6 AWG WIRE
#10 RING TERMINALS FOR
12-10 AWG WIRE
REAR COVER FOR OUTPUT
POWER/ALARM TERMINAL BLOCK
REAR COVERS FOR INPUT
POWER TERMINAL BLOCK
VOLTAGE
LABEL