150-409-115-05, Issue 5

Installation

 

 

INSTALLATION

This section describes the compatibility and installation for the EDU-409 List 1.

COMPATIBILITY

The EDU-409 List 1 is compatible with the following ADC outdoor enclosures:

•HRE-500, single-slot unit

•HRE-458, 10-slot unit

•HRE-819, 12-slot unit

INSTALLING THE EDU-409 LIST 1

To install the EDU-409 List 1 in an enclosure, perform the following steps and refer to the enclosure installation manual for information about cabling, proper connections, grounding, and line and local power.

This product incorporates static sensitive components. Proper electrostatic discharge procedures must be followed.

To install the doubler unit, slide the doubler unit into the card guides for the desired slot (see Figure 2 on page 8). Then push the unit into the enclosure until it is seated in the card-edge connector. The unit should snap into place, indicating that it is properly seated.

EDU-409 List 1

January 26, 2000

7