![Step 6 - Run the upgrade program](/images/new-backgrounds/125285/125285113x1.webp)
The display should now show:
Step 6 - Run the upgrade program
The latest version of the SmartView XPro firmware is available from the Adder Technology website at www.addertec.com. The upgrade files will be supplied to you as a group and consist of several files as explained below. These files should be downloaded to the same directory on your computer.
1)A universal upgrade program
SVXPRO.EXE
2)Binary code files for each of the processors within the SmartView (up to 3)
e.g.4X16A129.HEX 4X16B129.HEX 4X16C129.HEX
These files use the following naming scheme. The first three characters are the model type (e.g. 4X16 is a SmartView 4XPro with 16 computer ports). The forth character is the processor designation. The last three character represent the firmware release version (e.g. 129 equals version 1.29).
3)A data file that tells the upgrade program (SVXPRO.EXE) which binary code files (HEX files) to download to the SmartView XPro and where to put each file. Theoretically this DAT file can be modified so that only certain processors are upgraded but do not do this unless specifically instructed by Adder technical support.
e.g.4X16V129.DAT
SmartView XPro | Installation and Use | Page 57 |