Step 2 - Connect your computer to the SmartView XPro
Connect your computer's serial port to the SmartView XPro's serial port (see figure 2)
Step 3 - Select flash upgrade mode using option switch 2 (labelled UPGRADE)
Move option switch 2 on the back of the SmartView XPro to the ON position (down).
Step 4 - Power off the SmartView XPro
Remove both power supplies from the XPro.
Step 5 - Power on the SmartView with the UPGRADE switch ON
Attach the power adapter to the SmartView whilst the UPGRADE switch is ON. The green USER display should now show a lower case 'u'. This indicates that the SmartView is ready to be upgraded.
SmartView XPro | Installation and Use | Page 56 |