Adder Technology CATxIP 1000 manual Power in connection, To connect the power supply

Power in connection

The AdderView CATxIP 1000 unit is supplied with a standard 5V power adapter. There is no on/off switch on the unit, so operation begins as soon as a power adapter is connected.

To connect the power supply

LOCAL GLOBAL

USER USER

IP

POWER

IN

CAM

COMPUTER POWER

SYSTEM SWITCH

2Connect the IEC connector of the supplied country-specific power lead to the socket of the power adapter.



1Attach the output lead from the power adapter to the 5V socket on the rear panel of the AdderView CATxIP 1000.

		AdderView CATxIP
		1000 rear panel
		OPTION
		S
5
V
2.	A	16
0

12

output lead from

power adapter

3 Connect the power lead to a nearby main supply socket.

Note: Both the AdderView CATxIP 1000 and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose surface temperature exceeds 40 degrees Centigrade.

  



12