Adder Technology CATxIP 1000 manual Serial Configuration, Options Port, Options Baud

Serial Configuration

This page allows you to configure the OPTIONS serial port located at the rear of the AdderView CATxIP 1000.

To get here

1From a local keyboard, log on as the ‘admin’ user.

2Press (hotkeys can change).

3Press to show the Main Menu.

4Select ‘Configuration’ and press .

5Select ‘Serial Configuration’ & press .

Options Port

Settings: Power Control, Sync Units

   

      



 

Determines whether the RS232 serial OPTIONS port at the rear of the unit will be used for connection to power control switches or to synchronise the operation of two AdderView CATxIP 1000 units.

Options Baud

Settings: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

This option determines the speed of the RS232 serial OPTIONS port. The other communication settings are fixed as: No parity, 8 bit word, 1 stop bit.

Note: When ‘Options Port’ is set to ‘Sync Units’, the baud rate will be automatically changed to 19200.

 



59