Adder Technology X200 manual Connections at each CAM local unit

Connections at each CAM (local) unit

1Where possible ensure that power is disconnected from the system(s) to be connected. For CAMs with PS/2 keyboard and mouse connections, see Hot plugging PS/2-style connections and mouse restoration.

2For each CAM, attach its various connectors to the relevant sockets on the computer system.

A range of different	USB keyboard/mouse
	Sun keyboard/mouse
connector combinations
are made available	PS/2-style mouse
across the five CAM	PS/2-style keyboard
formats
	Audio
	Video

3Lay a suitable length of category 5, 5e or 6 cabling between each computer system/CAM and the location of the remote peripherals - see Cable length advice.

4For each cable run, attach the cable connector to the socket of the CAM. The other end of each cable run will attach to the remote X200 module.

Green indicator - power present

Yellow indicator - signal activity

Computer

Access

Module

Category 5, 5e or 6 cable	Note: CAMs derive power from the
to X200 module	computer system via the USB connector.

 special installation  configuration & welcome contents