Installation Manual | Chapter 2 Installation |
H3C S1526 Smart Ethernet Switch |
Chapter 2 Installation
2.1 Precautions
To avoid any damage to the device or human body arising from improper use of the S1526, please follow the precautions and requirements listed below.
I. Safety precautions
zUnplug the switch before cleaning. Do not clean the switch with wet cloth or liquid.
zDo not place the switch near water or in any damp area. Keep water or moisture from entering the switch chassis.
zMake sure the switch operates in a clean environment. Dust buildup on the chassis may result in static absorption, which will shorten the life span of the switch and cause communication failure.
zKeep the switch in good ventilation condition and do not place one switch on another, because the S1526 adopts air cooling approach as it generates a small amount of heat.
zMake sure that the operating voltage is consistent with that labeled on the switch, because the switch operates normally only under proper voltage input.
zDo not look directly at the laser beam inside the optical fiber, because it may hurt your eyes.
