Installation Manual | Chapter 2 Installation |
H3C S1526 Smart Ethernet Switch |
zElectromagnetic shielding approach is adopted when necessary, such as using shielded port cable.
zAll port cables are wired indoor, to prevent the ports from any damage that may be caused by overvoltage and overcurrent from lightning strike.
2.2Installing the Switch
Caution:
There is a seal on one mounting screw on the chassis of the switch. This seal must remain intact unless the agent is on the spot to maintain your switch. Please contact your local agent and get permission if you need to open the chassis. Otherwise, you will have to bear the responsibilities for all the serious consequences arising therefrom.
2.2.1 Installing the Switch into a 19-Inch Rack
Follow the steps below to mount the switch in a
1)Check that the rack is sturdy and properly earthed.
2)Use the screws to fix the mounting ears to both sides of the front panel of the switch.
