Installation Manual

Chapter 2 Installation

H3C S1526 Smart Ethernet Switch

2.3 Connecting the Cables

2.3.1Connecting Devices to the Switch

I.Connect the device to the Ethernet port

Use either crossover cables or straight through cables to connect the PC(s) or other device(s) to the Ethernet ports on the switch.

II.Connect the device to the uplink port

z

z

If the 10/100/1000Base-T Ethernet port is to be used as the uplink port, connect the device to it with either a crossover cable or a straight through cable.

If the SFP module port is to be used as the uplink port, connect the SFP module to it firstly, and then connect the LC connector of the optical fiber to the SFP module, as shown in the following figure.

Figure 2-4Connecting to the SFP module port

2-6

Page 16
Image 16
Addtron Technology S1526 Connecting the Cables, Connecting Devices to the Switch, Connect the device to the Ethernet port