Oki DP-5000 manual Removing the Scsi interface module, Connecting the printer to your computer

Removing the SCSI interface module

1.Turn off the power to your printer, computer, and all SCSI devices connected. Remove the power cable from the wall socket and the printer.

2.To disconnect the SCSI interface module (1) gen- tly pull the plastic handle (2) at the bottom of the module to release the catch and lift the module away from the printer.

2

1

Connecting the printer to your computer

Caution 1:

Power to the printer and computer must be turned off and the power cables unplugged before connecting or disconnecting the printer cable. Otherwise damage or malfunction may result.

Caution 2:

For best results use a high-impedance SCSI cable and an active terminator.

Caution 3:

Using other types of cables can cause the printer to malfunction.

Connect the SCSI cable (1) to the printer and to the computer (2). Secure the printer cable to the connectors on the printer and on the computer.

4

3

2

1

Note:

Always attach a terminator (3) to the printer if the printer is the last peripheral on the SCSI chain.

108 User’s Guide