Oki DP-5000 manual Connecting cables for Windows, Connecting the printer to your computer

Models: DP-5000

1 123
Download 123 pages 46.07 Kb
Page 19
Image 19

English

Chapter 2 - Initial Setup

Connecting cables for Windows

When your printer has been positioned in a suitable lo- cation, you can connect it to your Windows PC with a printer cable and to a suitable AC power source with the power cable.

Connecting the printer to your computer

Caution

Power to the printer and computer must be turned off and the power cables unplugged before connecting or disconnecting the printer cable. Otherwise damage or malfunction may result.

Connect the printer to the computer with a bi-direction- al printer cable. Secure the printer cable (1) to the con- nectors on the printer (2) and on the computer (3).

Note

When using your printer with a Macintosh computer, connect the printer to the Macintosh using a SCSI

2

13

interface module, see ‘Connecting SCSI interface for Macintosh’ in Appendix A.

Connecting the printer to a power supply

1.Plug the power cable into the power socket on the printer. Make sure that the power cable is securely seated in the socket.

Chapter 2 - Initial Setup

11

Page 19
Image 19
Oki DP-5000 manual Connecting cables for Windows, Connecting the printer to your computer