Selecting the correct driver
Before creating any documents in your application you should select the
Follow the steps below to select the correct printer driv- er.
1.From the Apple menu, select the Chooser.
2.Click on the
Note:
Make sure the device number in the Select a SCSI port box is highlighted. If it is not, your printer is not being recognised. Click on the device number a few times. If it is still not highlighted, it is possible that the Finder has insufficient memory. In this case, close the Chooser, run any one of your application programs, and select the printer from the Chooser again.
English
3.If you have several identical printers connected, click on the SCSI device number of the printer you will use. The factory device setting is #6. To change SCSI device numbers, see ‘Specifications and Settings’ in Chapter 8.
Note 1:
If you have more than one SCSI bus in your Macintosh, “SCSI #6 BUS #1” or similar will be displayed.
Note 2:
Immediately following installation, background print- ing is turned off. Click on the On button to enable background printing. Background printing will not be available if you did not install the Queue Kit software.
4.Click on the Close box to close the Chooser.
5.When the selected printer driver is changed from a previous printer driver, a dialogue box will appear to inform you that a different printer has been selected. Click on the OK button to close the dialogue box.
Testing the printer
To make sure the printer is functioning correctly, use the Print Desktop command in the Finder. Before us- ing Print Desktop check the following:
Chapter 4 - Installation and Operation, Macintosh | 33 |
