2.SCSI connector - The SCSI connectors are used for connecting to the Macintosh computer and/or other SCSI devices.
3.Paper feed switch - This switch sets the paper feeding method to automatic feed mode or man- ual feed mode.
4.Power socket - The power cable connects to the power socket.
Inside the printer
1.Marking sticker - The marking sticker confirms that the carriage is in the standard position. Try not to smear the face of the sticker. If it gets dirty, gently clean it with a dry cotton swab. As you do so, be careful not to peel it off.
2
1 
2.Ink cartridge holder plate - There are four holder plates which hold the two ink cartridges each
needed for a particular printing job. A maximum of seven ink cartridges is allowed.
3.Carriage - The carriage automatically picks up the specific ink cartridge needed for printing and moves it to the printing location. The carriage also contains the print head.
3
4
5
4.Release lever - This lever, located to the right of the carriage and platen, is used to clear paper jams. Press the release lever down to remove the jammed paper. When you close the front cover, the lever will automatically go back to its original position.
5.Print head - The print head prints the characters. Take care not touch the underside of the head.
8 | User’s Guide |
