English
Chapter 4 - Installation and Operation, Macintosh 39
perature see your computer’s reference manual
for details.
Note 1:
Some monitors do not allow the colour temperature to
be changed. In this case, open Monitor & Sound in
Control Panels and set the Gamma option to Page-
White Gamma, which provides a colour temperature
similar to D50.
Note 2:
Once you have completed steps 1 through 3, you
should not need to repeat them unless you wish to
change the settings.
4. Prepare print data and set up the paper for print-
ing. Select Print from the File menu.
Note:
The contents of the Print dialogue box depend on the
application software. If the colour setting options
RGB, CMYK, or others are available in the dialogue
box, select the RGB option. If you select the CMY
option, the printed output will differ from the colours
displayed on the monitor.
5. To enable the ColorSync function during printing.
Click the Image.. button in the Print dialogue box
to display the Colours dialogue box. Select
ColorSync from the Colour Matching options.
After the settings have been completed, click OK.
Note:
When printing a photograph, it is advisable to turn on
the Darker Black option. The darkness graduation will
then be smoothed because black will be expressed by
all four colours .
6. After returning to the Print dialogue box, click
Print to start printing.
Printing on reverse side
The DP-5000 printer has a special option for printing on
the reverse side of paper. The Print On Reverse Side
option skips the paper curl reforming process for best
printing results.
Setting up the printer driver for printing on reverse side
1. In the application you want to print with, select
Page Setup from the File menu to open the Page
Setup dialogue box.
2. Make any necessary changes to the settings in the
Page Setup dialogue box.