1.Press the front cover release button and gently lower the front cover.
2.Gently apply the tape (1) to dirty spots on the platen (2), and rub your finger over the tape.
3 | 2 |
| 1 |
Caution:
Do not touch or remove the white pad (3) on the left side of the platen. Doing so may damage the printer.
English
3.Slowly peel off the tape.
4.Repeat as necessary to remove dirt from the platen.
Cleaning the feed roller
Use isopropyl alcohol and a cotton swab to clean the feed roller as described below.
Caution 1:
Do not use benzene, thinner, or other volatile materials, as they may damage the printer components.
Caution 2:
Do not get the inside of the printer wet.
1.The printer must be initialised for cleaning the feed roller. To initialise turn off the printer first, then press the power button to turn the printer on again.
2.Push the front cover eject button and gently lower the front cover.
3.Press the ready/insert button to move the carriage to a safe position.
Chapter 6 - Maintenance | 61 |
