Oki DP-5000 manual Windows

Windows 98

Q1 The Add New Hardware Wizard (USB Printer) does not appear when the USB interface cable is connected.

Please check the following:

1.Make sure that the USB interface cable is prop- erly connected to your printer and to your PC, and the printer is turned on.

2.Make sure that the ‘Unknown Devices’ is not listed in the Device Manager section of System Properties. To check this, follow these steps:

a Right-click My Computer and select Prop- erties.

b In the System Properties window that appears, select the Device Manager tab.

c Click View devices by type to display all installed devices.

d If ‘Other devices’ exists, you need to delete it.

e Double-click Other devices to view details, click Unknown Device, and then click Remove button.

fClick OK to remove the Unknown Device from your system, and then insert the USB interface cable to your computer.

3.If for some reason your first installation attempt is unsuccessful, try the following procedure.

aUnplug the USB interface cable from your computer.

bPlace the OKI DP-5000 Setup Disc in your CD-ROM drive. From the Windows Start menu, choose Run. In the dialog box that appears, type the following: D:\driv- ers\usb\English\MDULPTUN.EXE (Where

D:is the letter of your CDROM drive)

cThe Confirm Uninstall window will appear. Click Yes to uninstall the USB port monitor.

dWhen the Windows prompts you to restart your computer, click Yes.

eNow proceed from Step 4 of the ‘Installing the USB Printer Driver’ section.

102 User’s Guide