5.Paper stopper - This stopper prevents the paper from rising when the small size media is set verti- cally for printing.
6.Paper support - The paper support holds the loaded paper upright. To extend the paper sup- port, pull up on the top edge.
7.Paper feed guide - This guide feeds the paper into the printer. Set the adjustable guide on the left to match the paper size being used.
Rear view of printer
1.Parallel interface connector - The printer cable is connected to the parallel interface connector.
1
2 
3
4
English
2.Accessory connector - This connector is used to connect an optional dye sublimation key or Mac- intosh interface module to the printer. Make sure you remove the rectangular plastic connector cover before connecting either of these options.
3.Paper feed switch - This switch sets the paper feeding method to automatic feed mode or man- ual feed mode.
4.Power socket - The power cable connects to the power socket.
Rear view of printer with Macintosh interface module
1.DIP switches - The DIP switches are used to set the SCSI device number for the printer.
3
1
2
4
Chapter 1 - Introduction | 7 |
